f. Remove the hose clamp from the pilot-arc and coolant assembly, put it in the groove on the
console collar.
g. Put the assembly coupler on the console collar and tighten the hose clamp.
2. Connect the pilot-arc and coolant assembly to the TorchConnect console:
a. Put the pilot-arc and coolant assembly through console collar.
b. Connect the coolant-return hose with red bands to the coolant-return fitting with the red band.
c. Connect the coolant-supply hose with green bands to the coolant-supply fitting with the green
band.
d. Connect the pilot-arc cable in the TorchConnect console.
e. Remove the hose clamp from the pilot-arc and coolant assembly, put it in the groove on the
Installation
3
120
811530 Instruction Manual XPR460
To Next Page
Loading...
