Hypertherm XPR460 - Ethercat CNC Interface Cables

Part number Length Part number Length
428363 3 m (9.8 feet) 428367 10 m (32.8 feet)
428364 4.5 m (14.8 feet) 428368 15 m (49.2 feet)
428365 6 m (19.7 feet) - -
428366 7.5 m (24.6 feet) - -
EtherCAT CNC interface cables
The EtherCAT CNC interface cable has the following characteristics: RJ-45 connector, male-male, SF/
UTP shield, 2 twisted pairs, 22 AWG.
For more information on EtherCAT cable specifications, refer to EtherCAT cable specifications on page
156.
Part number Length Part number Length
223506 0.3 m (1 foot) 223512 10 m (32.8 feet)
223507 0.6 m (2 feet) 223513 15 m (49.2 feet)
223508 1.5 m (4.9 feet) 223514 22.5 m (73.8 feet)
223672 2.5 m (8.2 feet) 223515 30 m (98.4 feet)
223509 3 m (9.8 feet) 223516 45 m (147.6 feet)
223510 6 m (19.7 feet) 223517 60 m (196.9 feet)
223511 7.5 m (24.6 feet) 223714 75 m (246.1 feet)
Parts List
9
428
811530 Instruction Manual XPR460