Hypertherm XPR460 - Control Parts - 2; Wire Harness and CAN Cables in the Plasma Power Supply

Control parts - 2
Part number Description Designator Quantity
229640 Power source: 88 VAC - 264 VAC to 24 VDC PS1 1
10084334 Control PCB with wireless tag PCB1 1
141592 Wireless module for control PCB U83 1
141597 Plasma power supply expansion PCB PCB9 1
208394 Fuse holder: 2P, 30 A, 600 V - 1
208395 Fuse: 8 A, 600 V, Class R (used in 380 V, 400 V, 415 V, 440
V, 480 V, 600 V)
208397 Fuse: 15 A, 600 V, Class R (used in 200 V, 208 V, 220 V,
240 V)
F1, F2 2
10085206 I/OPCB PCB5 1
003277 Pilot arc relay: 24 VDC, coil, 60 A 28 VDC contacts CR1 1
003277 Cooler power relay: 24 VDC, coil, 60 A 28 VDC contacts - 1
101316 Relay cover (pilot arc relay and cooler power relay) - 2
10085251 Chopper assembly Chopper 1,
Chopper 2,
Chopper 3
3
Wire harness and CAN cables in the plasma power supply
Part number Description
429117 XPR460 wire harness
223399 CAN cable 0.5 m (1.6 ft) (Located between the choppers.)
223400 CAN cable 1 m (3.3 ft) (Located between the control PCB and chopper.)
Parts List
9
398
811530 Instruction Manual XPR460