Client ID
This is the identifier for a device that communicates with the plasma power supply. This ID uses the
Coordinated Universal Time (UTC) timestamp and is saved in a browser cookie.
If the Client ID and the Operator ID are the same on your device, you are in control of the plasma
power supply.
Connection
This is the status of the communication between the device and the plasma power supply. (Good
or Error.)
Plasma power supply screen
On this screen you can monitor the status of the plasma power supply. This screen also shows a list of
inputs and outputs. When an input or output is active, the screen shows it as red or gray.
Connect for Communication
4
190
811530 Instruction Manual XPR460
To Next Page
Loading...
