Hypertherm XPR460 - Connect the Power, CAN, and 3-Gas Assembly for Core

console collar.
f. Put the coupler on the console collar and tighten the clamp.
Connect the power, CAN, and 3-gas assembly for Core
Use this information to connect the power cable, CAN cable, oxygen hose, nitrogen hose, and air hose to
the Core gas connect console and the TorchConnect console.
Figure 32 - Power, CAN, and 3-gas assembly between an example
gas connect console and the TorchConnect console
1 Power cable
2 CAN cable
3 Oxygen hose, blue
4 Nitrogen hose, black
5 Air hose, black
6 Core gas connect console
7 TorchConnect console
Installation
3
121811530Instruction ManualXPR460