Hypertherm XPR460 - Connect the Gas Connect Console (Core, Coreplus) to the Torchconnect Console; Connect the Pilot-Arc and Coolant Assembly for Core or Coreplus

Figure 30 - Connections complete for the gas connect console (continued)
1 Coolant-supply (green) and coolant-return (red) hoses
2 Power cable, 120 VAC
3 CAN cable
4 Negative cables
5 Pilot-arc cable
Connect the gas connect console (Core, CorePlus) to the
TorchConnect console
Use this information to connect the Core or CorePlus gas connect console.
■
If you have a VWI or OptiMix gas connect console, refer to Connect the gas connect console (VWI,
OptiMix) to the TorchConnect console on page 123.
Connect the pilot-arc and coolant assembly for Core or CorePlus
Use this information to connect the pilot-arc cable, coolant-return hose, and coolant-supply hose assembly
to the Core or CorePlus gas connect console and the TorchConnect console.
Figure 31 - Pilot-arc and coolant assembly
1 Pilot-arc cable, yellow
2 Coolant-return hose, red bands
3 Coolant-supply hose, green bands
4 Assembly coupler
5 To the gas connect console
6 To the TorchConnect console
For lengths, refer to Pilot-arc and coolant assemblies (Core, CorePlus)
on page 426.
Installation
3
118
811530 Instruction Manual XPR460