Hypertherm XPR460 - Configuration with VWI or Optimix Gas Connect Consoles

8b Coolant-supply hose and coolant-return hose
9 Power, CAN, 4-gas assembly
9c Power cable, 120 VAC
9d CAN cable
9e Four gas hoses (CorePlus)
10 Torch lead
11 Hoses for supply gases
12 Power cable, 220 VAC
* Regulators
Put a gas regulator 3 meters (10 feet) or less from the gas connect console, or adjust inlet gas pressures to
be in the specified process gas tolerances.
Configuration with VWI or OptiMix gas connect consoles
1 Work cables
2 CNC connection cable (EtherCAT shown)
Installation
3
90
811530 Instruction Manual XPR460