Hypertherm XPR460 - Non-Ferrous (Stainless Steel and Aluminum) Example Configurations; Non-Ferrous - 40 a - N and Air;Air; Non-Ferrous - 60 a - F5;N O, and Air;Air

Figure 59 - Mild steel consumables 50 A – 460 A (continued)
1 Shield retaining cap
2
Shield
1
3 Nozzle retaining cap
4 Nozzle
5
Swirl ring
1
6 Electrode
7 Water tube
1 The bottom part number is for mirror cutting only.
Non-ferrous (stainless steel and aluminum) example
configurations
Use these sets of consumables to cut non-ferrous material. Stainless steel and aluminum are examples of
non-ferrous metals.
Non-ferrous – 40 A – N
2
/N
2
and Air/Air
Figure 60 - Non-ferrous 40 A consumables
1 Shield retaining cap
2
Shield
1
3 Nozzle retaining cap
4 Nozzle
5
Swirl ring
1
6 Electrode
7 Water tube
1 The bottom part number is for mirror cutting only.
Operation
6
238
811530 Instruction Manual XPR460