Hypertherm XPR460 - Qualifications and Requirements; Document Requirements; Operator Qualifications

2
Qualifications and Requirements
41811530Instruction ManualXPR460
2Qualifications and Requirements
Document requirements
This manual refers to several other documents. These documents include:
■
XPR Cut Charts Instruction Manual (809830)
■
CNC Communication Protocol for the XPR Cutting System (809810)
■
XPR Preventive Maintenance Program (PMP) Instruction Manual (809490)
■
XPR Firmware Updates Field Service Bulletin (809820)
If you do not have these documents, technical documentation is available at
www.hypertherm.com/support460 and www.hypertherm.com/docs.
Technical documentation is current as of the date of its release.
Subsequent revisions are possible. Refer to www.hypertherm.com/docs for
the most recent revisions of released documents.
Operator qualifications
A person is considered qualified to operate the cutting system if he or she is trained and knowledgeable
about cutting system equipment construction, operation, and work methods, and about how to recognize
and avoid hazards that can be present with certain cutting system equipment or work methods.