6: not supported
The different gas connect consoles have different capabilities. For example, argon assist and argon
marking for mild steel are available for cutting systems installed with OptiMix, VWI, or CorePlus gas
connect consoles, but not with Core.
Select a process that aligns with the gas connect console and the type of cutting that you are trying to do.
Refer to:
■
Process selection on page 231
■
Cut charts on page 232
Troubleshooting flowchart for diagnostic code 716
Refer to these flowcharts for an overview of the troubleshooting process for the 716 diagnostic code.
Diagnostics and Troubleshooting
8
360
811530 Instruction Manual XPR460
To Next Page
Loading...
