Hypertherm XPR460 - Connect the Torch Lead to the Torchconnect Console

b. Tighten the hose clamp that holds the collar in position.
Connect the torch lead to the TorchConnect console
Make sure to use the correct lead lengths for the best cut quality and longest consumable life.
NOTICE
FOR THE BEST CUT QUALITY AND CONSUMABLE LIFE USE THE CORRECT LEAD
LENGTHS
Cut quality and the lifespan of consumables will be decreased if you change the lead lengths.
The manufactured lengths of torch and console leads are critical for system performance. Never
change the lengths of leads.
Figure 37 - Torch-lead assembly
1 Protective sleeve
2 Plasma valve cable
3 Ohmic lead
Installation
3
141811530Instruction ManualXPR460