Figure 3 - TorchConnect console dimensions and weight
The factory location for the mounting brackets is on the bottom of the TorchConnect console. However,
you can move the mounting brackets to either side. Console placement with the torch lead connection
on the bottom keeps to a minimum the risk of leaked water or coolant collecting inside of the console.
Water or coolant collection inside of the TorchConnect console can cause damage to internal electric
components.
For mounting dimensions, refer to Put the TorchConnect console in
position on page 95.
Cooler specifications
Use these dimensions for cooler mounting or placement.
Hypertherm
®
recommends a minimum separation distance of 1 meter (3.3 feet) between the cooler and
other system components, or between the cooler and an obstacle.
The lift eye weight rating for the cooler is 91 kg (200 lb).
Specifications
1
35811530Instruction ManualXPR460
To Next Page
Loading...
