Hypertherm XPR460 - This Circuit Voids the Warranty. Do Not Use

A XPR
B CNC
1 +24V
2 CNC +24 V
3 • External relay
• 24 VDC low-power coil
• ≤ 10 mA or ≥ 2400 Ω
• For all relay coils it is necessary to have a freewheeling diode across the relay coil.
4 GND
This circuit voids the warranty. Do not use.
A XPR
B CNC
1 Any voltage
2 Power ground
Connect for Communication
4
204
811530 Instruction Manual XPR460