Connect the gas connect console (VWI, OptiMix) to the
TorchConnect console
These installation steps are for the VWI or OptiMix gas connect console.
■
If you have a Core or CorePlus gas connect console, refer to Connect the gas connect console (Core,
CorePlus) to the TorchConnect console on page 118.
Connect the pilot-arc, coolant, and shield-water assembly for VWI or OptiMix
Use this information to connect the pilot-arc cable, coolant-return hose, coolant-supply hose, and shield-
water hose assembly to the VWI or OptiMix gas connect console and the TorchConnect console.
Figure 34 - Pilot-arc, coolant, and shield-water assembly
1 Pilot-arc cable, yellow
2 Coolant-return hose, red bands
3 Coolant-supply hose, green bands
4 Shield-water hose
5 Assembly coupler
6 To gas connect console
7 To TorchConnect console
For lengths, refer to Pilot-arc, coolant, and shield-water assemblies (VWI,
OptiMix) on page 427.
The images that follow show an example gas connect console. Your gas connect console could look
different.
1. Connect the pilot-arc, coolant, and shield-water assembly to the gas connect console:
a. Put the pilot-arc, coolant, and shield-water assembly through the console collar on the gas
connect console.
Installation
3
123811530Instruction ManualXPR460
To Next Page
Loading...
