Hypertherm XPR460 - Connect the Gas Connect Console

Figure 27 - Connections complete on the rear of the cooler
1
2
3
4
5
8
9
6
7
1 Coolant supply to the gas connect console
2 Coolant return from the gas connect console
3 Coolant supply to the plasma power supply
4 Coolant return from the plasma power supply
5 Power, 220 VAC, from the plasma power supply
6 Not used
7 Not used
8 CAN in from the plasma power supply
9 CAN out to the gas connect console
Connect the gas connect console
Use this information to connect the hoses, cables, and leads to the gas connect console.
Before you begin:
■
Put the plasma power supply in position on page 91
■
Ground the system components on page 98
■
Prepare the hoses, cables, and leads on page 105
■
Refer to the image that shows the connections on the gas connect console.
Figure 28 - Connectors for hoses, cables, and leads in the gas connect console
Installation
3
114
811530 Instruction Manual XPR460