Figure 28 - Connectors for hoses, cables, and leads in the gas connect console (continued)
1 Coolant-supply (green) and coolant-return (red) hoses
2 Power cable, 120 VAC
3 CAN cable
4 Negative cables
5 Pilot-arc cable
The images that follow show an example gas connect console. Your gas
connect console could look different.
1. Connect the coolant-hose assembly to the gas connect console from the cooler.
The coolant-hose assembly includes one coolant-supply hose with
green bands and one coolant-return hose with red bands. At least
one coolant-hose assembly is necessary for all cutting systems.
Some cutting systems use two coolant-hose assemblies.
Installation
3
115811530Instruction ManualXPR460
To Next Page
Loading...
