■
Two fans for cooling
■
Control PCB
■
Power distribution PCB for the cooler
■
Power distribution PCB for the cooler fans
A green power-indicator LED on the front illuminates when power is supplied to the cooler.
The cutting system ships without coolant in the reservoir. Before you operate the cutting system, you must
fill it with coolant.
Torch description
The torch assembly has a torch mount-sleeve, torch receptacle, torch, and water tube.
The torch receptacle has a gas-selection valve. Consumables are installed on the torch.
Plasma power supply specifications
The part number and some specifications differ for each type of plasma power supply.
Figure 1 - Plasma power supply dimensions
Specifications
1
30
811530 Instruction Manual XPR460
To Next Page
Loading...
