b. For ease of access, remove the top insulation panel by moving it horizontally before you
connect the pilot-arc cable.
c. Connect the pilot-arc cable.
d. Connect the coolant-return hose with the red bands to the coolant-return fitting with the red
band.
e. Connect the coolant-supply hose with the green bands to the coolant-supply fitting with the
green band.
f. Connect the shield-water hose.
g. Remove the hose clamp from the pilot-arc, coolant, and shield-water assembly, put it in the
groove on the console collar.
Installation
3
124
811530 Instruction Manual XPR460
To Next Page
Loading...
