Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
8130 IOA detected recoverable device bus error
An error occurred on SCSI bus 0. No action is required. This reference code
is logged for information only.
8131 IOA detected recoverable device bus error
An error occurred on SCSI bus 1. No action is required. This reference code
is logged for information only.
8132 IOA detected recoverable device bus error
An error occurred on SCSI bus 2. No action is required. This reference code
is logged for information only.
8140 IOA detected recoverable device bus error
No action is required. This reference code is logged for information only.
8141 IOA detected recoverable device error
No action is required. This reference code is logged for information only.
8145 A recoverable I/O processor error occurred. STORIOA
8146 Disk device detected recoverable error FI01105
8150 A permanent I/O processor failure occurred STORIOA
IOP
FI01107
ANYBUS
8151 I/O processor Licensed Internal Code error AJDGP01
STORIOA
8155 to 8156 A permanent I/O processor failure occurred AJDGP01
STORIOA
8200 I/O processor Licensed Internal Code error AJDGP01
IOP
9000 to 9001 I/O processor card detected device error FI01105
STORIOA
9002 I/O processor card detected device error
Perform “SDIOP-PIP16” on page 407.
FI01105
STORIOA
FI01140
BACKPLN
FI01106
9008 I/O card does not support functions expected by devices
Perform “SDIOP-PIP25” on page 425.
SVCDOCS
9010 Cache data associated with attached devices cannot be found
Perform “SDIOP-PIP31” on page 435.
SVCDOCS
9011 Cache data belongs to devices other than those attached
Perform “SDIOP-PIP32” on page 436.
SVCDOCS
9014 Mode jumper overridden due to cache data in conflicting mode
See “Mode jumper has been overridden” on page 935.
SVCDOCS
9015 Mode jumper missing
See “Mode jumper is missing” on page 936.
SVCDOCS
2748, 2763, 2778
Chapter 2. Unit Reference Codes 121
To Next Page
Loading...
Need help?
General