EasyManuals Logo
Home>IBM>Server>i 830

IBM i 830 User Manual

IBM i 830
1000 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Does the IPL complete successfully?
No Yes
The problem has been corrected.
This ends the procedure.
8. Obtain another copy of the tape. Repeat steps 6 and 7 using the new tape. If
this does not correct the problem, continue with step 9.
9. Look at the 4 rightmost characters of the Data display for word 1. These 4
characters are the unit reference code.
10. If the 3490 indicator panel shows a check (CHK) code or an error code, see the
Start section of the 3490 service information.
11. See SRC Address Formats on page 936 to determine the IOP, IOA, and
device address.
12. Find the unit reference code in the following table.
13. See the Start section of the 3490 service information.
Notes:
1. If the failing item is a failing item (FI) code, go to Failing Items on page 479
to determine which part number associated with the FI code is failing.
2. If the failing item is a type number, go to Type, Model, and Part Number list
on page 885 to determine the part number.
3. If the failing item is a symbolic FRU, go to Symbolic FRUs on page 495 to
determine the part number.
Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item
0xxx, 1xxx,
2000
Tape unit failure
Use online problem analysis and the 3490 Tape Unit
service information to analyze the problem.
2001 Tape path dirty or write data check error
Clean the tape path using the cleaning procedures in the
3490 Magnetic Tape Subsystem Operators Guide, GA32-0124.
Use the 3490 Tape Unit service information to continue
analyzing the problem.
MHK0001
DHK0002
2003 Tape path dirty or write identification record error
Clean the tape path using the cleaning procedures in the
3490 Magnetic Tape Subsystem Operators Guide, GA32-0124.
Use the 3490 Tape Unit service information to continue
analyzing the problem.
MHK0001
DHK0002
2008 Tape path dirty or read data check error
Clean the tape path using the cleaning procedures in the
3490 Magnetic Tape Subsystem Operators Guide, GA32-0124.
Use the 3490 Tape Unit service information to continue
analyzing the problem.
MHK0001
DHK0002
3490
Chapter 2. Unit Reference Codes 135

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM i 830 and is the answer not in the manual?

IBM i 830 Specifications

General IconGeneral
BrandIBM
Modeli 830
CategoryServer
LanguageEnglish

Related product manuals