IBM i 830 User Manual

Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item
2009 Tape path dirty or read identification record error
Clean the tape path using the cleaning procedures in the
3490 Magnetic Tape Subsystem Operator’s Guide, GA32-0124.
Use the 3490 Tape Unit service information to continue
analyzing the problem.
MHK0001
DHK0002
2010 Tape unit failure
Use online problem analysis and the 3490 Tape Unit
service information to continue analyzing the problem.
2014 Recoverable tape unit failure; logged only
No action required. This reference code is logged for
information only.
2015 Tape unit failure
Clean the tape path using the cleaning procedures in the
3490 Magnetic Tape Subsystem Operator’s Guide, GA32-0124.
Use the 3490 Tape Unit service information to continue
analyzing the problem.
DHK0002
FI00856
FI00845
2017 Write Protect violation reported by tape unit; logged only
No action required. This reference code is logged for
information only.
202x, 205x,
206x, 21xx,
22xx
Tape unit failure
Use online problem analysis and the 3490 Tape Unit
service information to continue analyzing the problem.
23xx Tape Library failure
Use the 3494 Tape Library Dataserver Maintenance
Information to analyze the problem.
26xx, 27xx,
3xxx, 4xxx,
5xxx, 6xxx,
7xxx, 8xxx
Tape unit failure
Use online problem analysis and the 3490 Tape Unit
service information to continue analyzing the problem.
9020 I/O processor detected a SCSI bus configuration error
Before exchanging any parts, verify that the following
conditions are not present:
v Tape and DASD devices attached to the same type 6501
I/O processor
v A device type or model that is not given support
UHKCNFG
FI00851
FI00130
3490
136
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English