Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9201 Tape unit command timeout
Before exchanging any parts, do the following:
1. Ensure that the device is powered on.
2. Ensure that an interposer is connected between the I/O processor and
the SCSI cable.
3. Ensure that the SCSI cable between the interposer and the device is
seated correctly, and that there are no bent or damaged pins on the
SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
DHZDEV
FI00131
05H3834
EXTSCSI
61G8324
9202 Tape unit failed after Licensed Internal Code was loaded
Before exchanging any parts, do the following:
1. Ensure that the device is powered on.
2. Ensure that an interposer is connected between the I/O processor and
the SCSI cable.
3. Ensure that the SCSI cable between the interposer and the device is
seated correctly, and that there are no bent or damaged pins on the
SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
DHZDEV
FI00131
05H3834
EXTSCSI
61G8324
9210 Illegal or unsupported tape unit response DHZDEV
FI00131
FI00130
9211 Gateway device detected a bus protocol error
Use the gateway device service documentation to analyze the problem.
FCGATE
FCIOA
DHZDEV
ANYFC
FCCABLE
EXTSCSI
61G8324
9300 Tape unit failure DHZDEV
9301 Tape device failure, redundancy lost
The tape unit detected a hardware failure that does not prevent the tape
unit from completing the current operation.
Refer to the 3570 Tape Unit service information to determine the failing
item.
DHZDEV
9302 I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O processor data. For
more information, see the iSeries Service Functions information or ask your
next level of support for assistance.
FI00130
9303 Gateway device failure
Use the gateway device service documenation to analyze the problem.
FCGATE
9310 Licensed Internal Code for the tape unit is not correct DHZDEV
FI00130
3570
144
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
Need help?
General