EasyManuals Logo

IBM i 830 User Manual

IBM i 830
1000 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
9102 Gateway device detected a SCSI interface error
Use the gateway device service documentation to analyze the problem.
FI00871
FCGATE
FI00872
DEVTERM
9200 I/O processor addressed the tape unit; no response
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
FI00871
FI01112
FI00872
DEVTERM
9201 Tape unit command timeout
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
FI00871
FI01112
FI00872
DEVTERM
MH7TMED
9202 Tape unit failed after Licensed Internal Code was loaded
If the attached device is an external device, do the following before
exchanging any parts:
1. Ensure that the device is powered on.
2. If an interposer is required, make sure that it is connected between the
I/O processor and the SCSI cable.
3. Ensure that the SCSI cable is seated correctly, and that there are no bent
or damaged pins on the SCSI cable.
4. Ensure that a terminating plug is attached to the device end of the SCSI
cable.
FI00871
FI01112
FI00872
DEVTERM
9210 Illegal or unsupported tape unit response FI00871
FI01112
FI00130
9211 Gateway device detected a bus protocol error
Use the gateway device service documentation to analyze the problem.
FCGATE
FCIOA
FI00871
ANYFC
FCCABLE
FI00872
DEVTERM
9300 Tape unit failure FI00871
9301 Tape device failure, redundancy lost
The tape unit detected a hardware failure that does not prevent the tape
unit from completing the current operation.
FI00871
63A0
158
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM i 830 and is the answer not in the manual?

IBM i 830 Specifications

General IconGeneral
BrandIBM
Modeli 830
CategoryServer
LanguageEnglish

Related product manuals