IBM i 830 - Page 257

Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item Location
0413 Rebuild of recovery object index failed
Perform “LIC-PIP8” on page 349.
AJDG301
0414 Install of operating system failed on read from media
Perform “LIC-PIP8” on page 349.
FI00300
0415 Create user profile failed
Perform “LIC-PIP8” on page 349.
AJDG301
0417 Initiating the initial process failed
Perform “LIC-PIP8” on page 349.
AJDG301
0418 to 0419,
0420
The information loaded from the install media is not valid
Perform “LIC-PIP8” on page 349.
AJDG301
0421 Bad return code creating a queue or message
Perform “LIC-PIP8” on page 349.
AJDG301
0422 The Load/Dump command failed
Perform “LIC-PIP8” on page 349.
AJDG301
0439 Opening the IPCF connection failed
Perform “LIC-PIP8” on page 349.
AJDG301
0440 Termination code is not valid
Perform “LIC-PIP8” on page 349.
AJDG301
0441 Power off system command failed
Perform “LIC-PIP8” on page 349.
AJDG301
0443 Programmed IPL command failure
Perform “LIC-PIP8” on page 349.
AJDG301
0446 Error during machine termination
Perform “LIC-PIP8” on page 349.
AJDG301
0447 Failure to reach MI boundary
Perform “LIC-PIP8” on page 349.
AJDG301
0449 Exception in MI boundary manager
Perform “LIC-PIP8” on page 349.
AJDG301
0506 Attempt to destroy a task with critical flag on
Perform “LIC-PIP8” on page 349.
AJDG301
0607 Maximum stack size exceeded in process or task
Perform “LIC-PIP8” on page 349.
AJDG301
0620 Event management index is not usable
Perform “LIC-PIP8” on page 349.
AJDG301
B6xx (including A6xx)
Chapter 2. Unit Reference Codes 243