IBM i 830

For FC 5078/0578:
v CB1 – Tower Card
This ends the procedure.
8. Is the SRC 3104, 3114 , 3118 or 311C ?
No Yes
↓ Replace the following using the appropriate Locations and Failing
Items Table for the Model/Feature Code you are working on (see
either Table 41 on page 710, Table 42 on page 720, “Locations — FC
5074 I/O Tower” on page 736, “Locations — FC 5079 I/O Tower” on
page 747, or “Locations — FC 5078, 0578 PCI Expansion Unit” on
page 743):
v CB1 – Tower Card
This ends the procedure.
9. Is the SRC 3110, 3111, or 3112?
Yes No
↓ Go to step 14 on page 549 of this procedure.
10. Are you working on a FC 5078/0578?
No Yes
↓ Replace the following using “Locations — FC 5078, 0578 PCI
Expansion Unit” on page 743:
v CB1 – TWRCARD
This ends the procedure.
11. Is the SRC 3110?
No Yes
↓ Replace the following using the appropriate Locations and Failing
Items Table for the Model/Feature Code you are working on (see
either Table 41 on page 710, Table 42 on page 720, “Locations — FC
5074 I/O Tower” on page 736, “Locations — FC 5079 I/O Tower” on
page 747):
v DB1 – Device Board
v CB1 – Tower Card
This ends the procedure.
12. Is the SRC 3111?
No Yes
↓ Replace the following using the appropriate Locations and Failing
Items Table for the Model/Feature Code you are working on (see
either Table 41 on page 710, Table 42 on page 720, “Locations — FC
5074 I/O Tower” on page 736, “Locations — FC 5079 I/O Tower” on
page 747):
v DB2 – Device Board
v CB1 – Tower Card
This ends the procedure.
13. Is the SRC 3112?
Symbolic FRUs
548
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1