idp Smart-30 - Page 50

2014-03-24
50
4.1 Setup
Item Explanation
Black Density Set the image’s total density (Range : -1500 ~ 1000) (See 4.1.3.2)
Overlay Density Set the color density (YMC) (Range : -500 ~ 500) (See 4.1.3.2)
Example Preview the changed value
Print To check the adjusted value. You can print the test card
> Show the expansion items
Get Config. Load the printer’s setup value
Set Config.
Save the changed setup value
In case you use the password, if it is not matching, it will not be saved
Load from File Load the saved file
Save to File Save the setup value to the file
Close Exit the program
Load : SMART Load standard setup value for SMART
Load : SMART Lite Load standard setup value for SMART Lite
Load : SMART Rewritable Load standard setup value for SMART Rewritable
• Basic Setup Item