Intel Stratix 10 - Page 116

Figure 76. Reset Controller when Use Separate TX/RX Reset Per Channel is Turned ON
and Enable Individual TX and RX Reset is Turned ON
E-Tile Native PHY IP
Reset Controller [N]
TX
RX
Reset Controller [0]
TX
RX
rx_ready[0]
tx_ready[0]
rx_reset[0]
tx_reset[0]
rx_ready[N]
tx_ready[N]
rx_reset[N]
tx_reset[N]
Figure 77. Reset Controller when Use Separate TX/RX Reset Per Channel is Turned OFF
and Enable Individual TX and RX Reset is Turned OFF
E-Tile Native PHY IP
Reset Controller
rx_ready[N:0]
tx_ready[N:0]
reset[0]
reset[N:1]
6. Resetting Transceiver Channels
UG-20056 | 2019.02.04
Intel
®
Stratix
®
10 E-Tile Transceiver PHY User Guide
Send Feedback
116