Intel Stratix 10 - General and Datapath Parameters

Figure 15. Native PHY IP Core Parameter Editor
Note: Although the Intel Quartus Prime Pro Edition software provides legality
checks, the supported FPGA fabric to transceiver interface widths and the
supported data rates are pending characterization.
2.2.1. General and Datapath Parameters
You can customize your instance of the Native PHY IP core by specifying parameter
values.
2. Implementing the Transceiver PHY Layer in Intel Stratix 10 Devices
UG-20056 | 2019.02.04
Send Feedback
Intel
®
Stratix
®
10 E-Tile Transceiver PHY User Guide
27