Intel Stratix 10 User Manual

Parameter Value Description
Enable capability registers On/Off Enables capability registers. These registers provide high-
level information about the transceiver channel's
configuration.
Set user-defined IP identifier User-defined Sets a user-defined numeric identifier that can be read
from the user_identifier offset when the capability
registers are enabled.
Enable control and status registers On/Off Enables soft registers for reading status signals and
writing control signals on the PHY interface through the
ADME or reconfiguration interface.
Configuration file prefix User-defined Specifies the file prefix used for generating configuration
files. Use a unique prefix for configuration files for each
variant of the Native PHY.
Generate SystemVerilog package File On/Off Creates a SystemVerilog package file that contains the
current configuration data values for all reconfiguration
addresses. Disabled by default.
Generate C header file On/Off Creates a C header file that contains the current
configuration data values for all reconfiguration addresses.
Disabled by default.
Generate MIF (Memory Initialize File) On/Off Creates a MIF file that contains the current configuration
data values for all reconfiguration addresses. Disabled by
default.
Enable multiple reconfiguration profiles On/Off Use the Parameter Editor to store multiple
configurations. The parameter settings for each profile are
tabulated in the Parameter Editor.
Enable embedded reconfiguration streamer On/Off Embeds the reconfiguration streamer into the Native PHY
IP core, and automates the dynamic reconfiguration
process between multiple predefined configuration
profiles.
Generate reduced reconfiguration files On/Off Enables the Native PHY IP core to generate
reconfiguration files that contain only the attributes that
differ between multiple profiles.
Number of reconfiguration profiles 1 to 8 Specifies the number of reconfiguration profiles to support
when multiple reconfiguration profiles are enabled.
Store current configuration to profile 0 to 7 Selects which reconfiguration profile to store.
Store configuration to selected profile N/A Stores the current Native PHY parameter settings to the
profile specified by Store current configuration to
profile specified.
Load configuration from selected profile N/A Loads the current Native PHY parameter settings to the
profile specified by Store current configuration to
profile specified.
continued...
7. Dynamic Reconfiguration
UG-20056 | 2019.02.04
Intel
®
Stratix
®
10 E-Tile Transceiver PHY User Guide
Send Feedback
134

Intel Stratix 10 Specifications

General

Brand	Intel
Model	Stratix 10
Category	Control Unit
Language	English