Interroll Drum motor DM series connecting cable
24 Version 2.0 (06/2018) en
Translation of original instruction manual
Removing the connecting cable
DANGER
Danger - electrocution
4 Only perform maintenance and repair work after you have switched off the power.
4 Faults on electrical equipment may be removed only by a trained electrician!
NOTICE
Improper assembly
Damage to the motor
4 During disassembly, ensure that the grease at the seals is not removed.
4 Protect the socket in the motor and the cable plug against contamination.
Required tools:
• Open-end wrench, 14 mm WAF
• Open-end wrench, 20 mm WAF
To Next Page
Loading...
