Juniper SRX5400 - Page 131

•
Junos Trio chipsets for increased scaling for bandwidth,
subscribers, and services
•
Forty 10-Gigabit Ethernet ports. The ports support SFP+
transceivers.
•
Requires high-capacity power supplies and high-capacity
fan trays.
•
The ports are labeled as (seeFigure 57 on page 131):
•
0/0 through 0/9
•
0/10 through 0/19
•
1/0 through 1/9
•
1/10 through 1/19
Hardware features
•
Application security
•
Application Layer Gateway (ALG)
•
Attack detection and prevention
•
Class of service (CoS)
•
Equal-cost multipath (ECMP) load balancing
•
GPRS Tunneling Protocol (GTP)
•
High availability (chassis cluster)
•
Intrusion detection and prevention (IDP)
•
IPsec VPN
•
Layer 2 transparent mode
•
Logical systems
•
Network Address Translation (NAT)
•
Routing protocols (BFD, BGP, IGMP, IS-IS, MLD,
Multicast, OSPF, PIM, RIP, and SCTP)
•
SSL proxy
•
Tenant systems
•
Unified threat management (UTM)
Software features
OK/FAIL LED, one bicolor:
•
Steady green—IOC is functioning normally.
•
Yellow—IOC has failed.
LINK LED, one green per port:
•
Steady green—Link is up.
•
Off—Link is down or disabled.
LEDs
132