Juniper SRX5400 - SRX5400 Network Cable and Transceiver Planning; Routing Engine Interface Cable and Wire Specifications for the SRX5400 Services Gateway

Table 42: Calculating System Thermal Output
Thermal Output (BTUs per hour)Power Supply
2564 * 3.41 = 8743 BTU/hrSRX5400 AC
2329 * 3.41 = 7941 BTU/hrSRX5400 DC
RELATED DOCUMENTATION
SRX5400 Services Gateway Environmental Specifications | 148
SRX5400 Network Cable and Transceiver Planning
IN THIS SECTION
Routing Engine Interface Cable and Wire Specifications for the SRX5400 Services Gateway | 160
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the SRX5400 Services Gateway | 161
Attenuation and Dispersion in Fiber-Optic Cable for the SRX5400 Services Gateway | 161
Calculating Power Budget for Fiber-Optic Cable for the SRX5400 Services Gateway | 162
Calculating Power Margin for Fiber-Optic Cable for the SRX5400 Services Gateway | 163
Routing Engine Interface Cable and Wire Specifications for the SRX5400
Services Gateway
Table 43 on page 161 lists the specifications for the cables that connect to management ports and the wires
that connect to the alarm relay contacts.
160