Juniper SRX5400 - Troubleshooting SRX5400 Services Mics

user@host> show chassis fpc detail
Slot 0 information:
State Online
Temperature 35
Total CPU DRAM 1024 MB
Total RLDRAM 259 MB
Total DDR DRAM 4864 MB
Start time: 2013-12-10 02:58:16 PST
Uptime: 1 day, 11 hours, 59 minutes, 15 seconds
Max Power Consumption 585 Watts
Slot 1 information:
State Online
Temperature 47
Total CPU DRAM 1024 MB
Total RLDRAM 259 MB
Total DDR DRAM 4864 MB
Start time: 2013-12-10 02:55:30 PST
Uptime: 1 day, 12 hours, 2 minutes, 1 second
Max Power Consumption 585 Watts
Slot 2 information:
State Online
Temperature 37
Total CPU DRAM 2048 MB
Total RLDRAM 1036 MB
Total DDR DRAM 6656 MB
Start time: 2013-12-10 02:58:07 PST
Uptime: 1 day, 11 hours, 59 minutes, 24 seconds
Max Power Consumption 570 Watts
For further description of the output from the command, see Junos OS System Basics and Services Command
Reference at www.juniper.net/documentation/.
Troubleshooting SRX5400 Services MICs
Problem
Description: The MICs are not functioning normally.
Solution
•
Check the status of each port on a MIC by looking at the LED located on the MIC faceplate.
•
Check the status of a port module by issuing the show chassis fpc pic-status CLI command. The MIC
slots in the MPC are numbered from 0 through 1:
359