EasyManua.ls Logo

Juniper SRX5400 - Troubleshooting the SRX5400 Services Gateway Power System

Juniper SRX5400
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Slot 0 information:
State Online
Temperature 35
Total CPU DRAM 1024 MB
Total RLDRAM 259 MB
Total DDR DRAM 4864 MB
Start time: 2013-12-10 02:58:16 PST
Uptime: 1 day, 11 hours, 59 minutes, 15 seconds
Max Power Consumption 585 Watts
Slot 1 information:
State Online
Temperature 47
Total CPU DRAM 1024 MB
Total RLDRAM 259 MB
Total DDR DRAM 4864 MB
Start time: 2013-12-10 02:55:30 PST
Uptime: 1 day, 12 hours, 2 minutes, 1 second
Max Power Consumption 585 Watts
Slot 2 information:
State Online
Temperature 37
Total CPU DRAM 2048 MB
Total RLDRAM 1036 MB
Total DDR DRAM 6656 MB
Start time: 2013-12-10 02:58:07 PST
Uptime: 1 day, 11 hours, 59 minutes, 24 seconds
Max Power Consumption 570 Watts
For further description of the output from the command, see Junos OS System Basics and Services Command
Reference at www.juniper.net/documentation/.
Troubleshooting the SRX5400 Services Gateway Power System
Problem
Description: The power system is not functioning normally.
Solution
Check the LEDs on each power supply faceplate.
If an AC power supply is correctly installed and functioning normally, the AC OK and DC OK LEDs
light steadily, and the PS FAIL LED is not lit.
361

Table of Contents

Other manuals for Juniper SRX5400

Related product manuals