SRX5400 Services Gateway System Overview
IN THIS SECTION
SRX5400 Services Gateway Description | 25
Benefits of the SRX5400 Services Gateway | 26
SRX5400 Services Gateway FRUs | 27
SRX5400 Services Gateway Component Redundancy | 28
SRX5400 Services Gateway Description
The SRX5400 Services Gateway is a high-performance, highly scalable, carrier-class security device with
multiprocessor architecture.
The SRX5400 Services Gateway is 5 rack units (U) tall. You can stack eight services gateways in a rack
that is at least 48 U (89.3 in. or 2.24 m) in height if it has a 1 in. cap between for increased port density
per unit of floor space.
The services gateway provides four slots that you can populate with one Switch Control Board (SCB) and
up to three additional cards of the following types:
•
Services Processing Cards (SPCs) provide the processing capacity to run integrated services such as
firewall, IPsec, and IDP.
NOTE: The SRX5400 Services Gateway supports only the SRX5K-SPC-4-15-320 (SPC2)
and does not support the SRX5K-SPC-2-10-40 (SPC1).
•
Modular Port Concentrators (MPCs) provide Ethernet interfaces that connect the services gateway to
your network.
25
To Next Page
Loading...
