set interfaces reth1 vlan-tagging
set interfaces reth1 redundant-ether-options redundancy-group 1
set interfaces reth1 unit 0 vlan-id 30
set interfaces reth1 unit 0 family inet address 55.55.55.1/8
9. Verify that the secondary node is running the upgraded Junos OS release.
root@cluster> show version node1
Hostname: <displays the hostname>
Model: <displays the model number>
Junos: 15.1X49-D10
JUNOS Software Release [15.1X49-D10]
root@cluster> show chassis cluster status
Monitor Failure codes:
CS Cold Sync monitoring FL Fabric Connection monitoring
GR GRES monitoring HW Hardware monitoring
IF Interface monitoring IP IP monitoring
LB Loopback monitoring MB Mbuf monitoring
NH Nexthop monitoring NP NPC monitoring
SP SPU monitoring SM Schedule monitoring
CF Config Sync monitoring
Cluster ID: 1
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 1
node0 0 lost n/a n/a n/a
node1 100 primary no no None
Redundancy group: 1 , Failover count: 3
node0 0 lost n/a n/a n/a
node1 150 primary no no None
root@cluster>show chassis fpc pic-status node1
Slot 1 Online SRX5k IOC II
PIC 0 Online 1x 100GE CFP
PIC 2 Online 2x 40GE QSFP+
Slot 2 Online SRX5k SPC II
PIC 0 Online SPU Cp
260
To Next Page
Loading...
