Juniper SRX5400 - Page 269

node1:
--------------------------------------------------------------------------
Flow session Flow session CP session CP session
FPC PIC CPU Mem current maximum current maximum
---------------------------------------------------------------------------
2 0 0 11 0 0 1999999 104857600
2 1 0 5 289065 4194304 0 0
2 2 0 5 289062 4194304 0 0
2 3 0 5 289060 4194304 0 0
4 0 0 5 289061 4194304 0 0
4 1 0 5 281249 4194304 0 0
4 2 0 5 281251 4194304 0 0
4 3 0 5 281251 4194304 0 0
Enable the traffic interfaces on the secondary node.
root@cluster> show interfaces terse | grep reth0
xe-3/0/0.0 up up aenet --> reth0.0
xe-3/0/0.32767 up up aenet --> reth0.32767
xe-9/0/0.0 up up aenet --> reth0.0
xe-9/0/0.32767 up up aenet --> reth0.32767
reth0 up up
reth0.0 up up inet 44.44.44.1/8
reth0.32767 up up multiservice
root@cluster> show interfaces terse | grep reth1
xe-3/0/4.0 up up aenet --> reth1.0
xe-3/0/4.32767 up up aenet --> reth1.32767
xe-9/0/4.0 up up aenet --> reth1.0
xe-9/0/4.32767 up up aenet --> reth1.32767
reth1 up up
reth1.0 up up inet 55.55.55.1/8
reth1.32767 up up multiservice
For more information about LICU, refer to KB article KB17947 from the Knowledge Base.
272