Juniper SRX5400 - Page 326

Redundancy group: 1 , Failover count: 1
node0 129 secondary no no None
node1 255 primary no no None
c. Check whether any licenses are installed:
root@node0> show system licenses
{secondary:node0}
root@node0> show system licenses
License usage:
Licenses Licenses Licenses Expiry
Feature name used installed needed
subscriber-acct 0 1 0 permanent
subscriber-auth 0 1 0 permanent
subscriber-addr 0 1 0 permanent
subscriber-vlan 0 1 0 permanent
subscriber-ip 0 1 0 permanent
scale-subscriber 0 1000 0 permanent
scale-l2tp 0 1000 0 permanent
scale-mobile-ip 0 1000 0 permanent
Licenses installed:
License identifier: xxxxxxxxxx
License version: 2
Features:
subscriber-acct - Per Subscriber Radius Accounting
permanent
subscriber-auth - Per Subscriber Radius Authentication
permanent
subscriber-addr - Address Pool Assignment
permanent
subscriber-vlan - Dynamic Auto-sensed Vlan
permanent
subscriber-ip - Dynamic and Static IP
permanent
d. If licenses are installed, copy the output of the show system license keys command into a file:
root@node0> show system license keys
e. Check whether any scripts are referenced in the configuration:
root@node0> show configuration system scripts
329