Table 18: AC Power Cord Specifications (continued)
GraphicPlug Type
Electrical
SpecificationModel NumberCountry
NEMA 5-15P125 VAC, 60 Hz ACCBL-PWR-RA-US15North
America
NEMA
L5-15P
125 VAC, 60 Hz ACCBL-PWR-RA-TWLK-US15
NEMA 6-20250 VAC, 60 Hz ACCBL-M-PWR-RA-US
NEMA
L6-20P
250 VAC, 60 Hz ACCBL-M-PWR-RA-TWLK-US
BS89/13240 VAC, 50 Hz ACCBL-M-PWR-RA-UKUnited
Kingdom
EN
60320-2-2/1
240 VAC, 50 Hz ACCBL-EX-PWR-C19-C20Worldwide
(except
Japan)
WARNING: The AC power cord for the services gateway is intended for use with the
services gateway only and not for any other use.
WARNING: To meet safety and electromagnetic interference (EMI) requirements and
to ensure proper operation, you must properly ground the services gateway chassis
before connecting power. See “Grounding the SRX5400 Services Gateway” on page 199
for instructions.
CAUTION: Power cords and cables must not block access to device components or
drape where people could trip on them.
50
To Next Page
Loading...
