Connecting the SRX5400 to External Devices | 193
Tools and Parts Required for SRX5400 Services Gateway Connections | 193
Connecting the SRX5400 Services Gateway to a Management Console or an Auxiliary
Device | 193
Connecting the SRX5400 Services Gateway to a Network for Out-of-Band Management | 195
Connecting an SRX5400 Services Gateway to an External Alarm-Reporting Device | 195
Connecting Network Cables to SRX5400 Services Gateway MICs | 197
Connecting the SRX5400 to Power | 198
Tools and Parts Required for SRX5400 Services Gateway Grounding and Power
Connections | 198
Grounding the SRX5400 Services Gateway | 199
Connecting Power to an AC-Powered SRX5400 Services Gateway | 200
Powering On an AC-Powered SRX5400 Services Gateway | 202
Connecting Power to a DC-Powered SRX5400 Services Gateway | 203
Powering On a DC-Powered SRX5400 Services Gateway | 206
Powering Off the SRX5400 Services Gateway | 207
Performing the Initial Software Configuration for the SRX5400 | 208
SRX5400 Services Gateway Software Configuration Overview | 208
Initially Configuring the SRX5400 Services Gateway | 209
Performing Initial Software Configuration Using J-Web | 214
Configuring Root Authentication and the Management Interface from the CLI | 215
Configuring Interfaces, Zones, and Policies with J-Web | 216
Maintaining Components
Maintaining the SRX5400 Chassis | 223
Routine Maintenance Procedures for the SRX5400 Services Gateway | 223
Replacing the SRX5400 Services Gateway Craft Interface | 223
Disconnecting the Alarm Relay Wires from the SRX5400 Services Gateway Craft
Interface | 224
Removing the SRX5400 Services Gateway Craft Interface | 224
Installing the SRX5400 Services Gateway Craft Interface | 225
viii
To Next Page
Loading...
Need help?
General
