Keysight E4980A/AL Precision LCR Meter 187
Save/Recall
Saving Measurement Results into USB Memory
6-
Step 11. Press [Trigger], then measure once.
Step 12. Press [Save/Recall].
Step 13. Press soft key SAVE DATA.
Step 14. Press soft key SAVE & STOP, then save to USB memory.
Step 15. When you complete the saving at USB memory, the message “Storing data
completed. : E498xXXX.csv” appears at system message area.
For example, when measurement point of List Sweep is 100, 100
measurement results are saved to USB memory.
Measurement result files are automatically assigned file names
E498x001.csv through E498x999.csv, and you cannot change the file
names.
To Next Page
Loading...
