Keysight E4980A/AL Precision LCR Meter 241
Overview of Remote Control
USB Remote Control System
8-
USB Port Types
There are two standard types of USB ports. The external controller (PC) must
be connected via the USB host port (type A), while the E4980A/AL and other
USB-compatible devices must be connected via the USB interface port (type
mini-B).
Preparing E4980A/AL
You do not have to configure any softkey or command for the E4980A/AL in
order to control the E4980A/AL from an external controller. Simply connect a
USB cable to the USB interface port.
Preparing External Controller
You must set up the I/O interface of the external controller in advance to
establish communication with the E4980A/AL via a USB. The USB can identify
devices automatically, so once you connect a USB cable to a target device, a
dialog box will appear for USB device registration.
Type A: USB host port
Type mini-B: USB interface port
The E4980A/AL will be identified as a new device if its serial number has
been changed.
To Next Page
Loading...
