Keysight E4980A/AL Precision LCR Meter 243
Overview of Remote Control
USB Remote Control System
8-
Control using C or Basic
You can control the E4980A/AL by programming using SICL/VISA with Visual
Studio in a Windows environment. For further information on controlling the
E4980A/AL, see the manual for SICL or VISA. For Keysight I/O Libraries Suite,
use Keysight I/O Libraries Suite 14.
You may employ aliases in programming using SICL/VISA.
The following example shows an OPEN command to control the E4980A/AL,
for which the alias is E4980_USBIF.
SICL id = iopen ("E4980_USBIF")
VISA viOpen (...,"E4980_USBIF",...)
For further details on the programming using SICL/VISA, see the SICL
Users Guide or the VISA Users Guide.
To Next Page
Loading...
