Keysight E4980AL - Page 389

Keysight E4980A/AL Precision LCR Meter 389
SCPI Command Reference
Command list
10-
[:LEVel] < numeric>
:COMParator
:ABIN {ON|OFF|1|0}
:BEEPer {FAIL|PASS}
:BIN
:CLEar [No Query]
:COUNt
:CLEar [No Query]
:DATA < numeric>,< numeric>,< numeric>,<
numeric>,< numeric>,< numeric>,<
numeric>,< numeric>,< numeric>,<
numeric>,< numeric>
[Query only]
[:STATe] {ON|OFF|1|0}
:MODE {ATOLerance|PTOLerance|SEQuence}
:SEQuence
:BIN < array>
:SLIMit < numeric>,< numeric>
[:STATe] {ON|OFF|1|0}
:SWAP {ON|OFF|1|0}
:TOLerance
:BIN[1-9] < numeric>,< numeric>
:NOMinal < numeric>
:CONTrol
:HANDler
:STATe {ON|OFF|1|0}
:SCANner
:STATe {ON|OFF|1|0}
:CORRection
:LENGth < numeric>
:LOAD
Command Parameter Note