Keysight E4980AL - Page 414

414 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
Command list
10-
MANUAL IP
ADDR
ENTER Sets the static IP address :SYST:COMM:LAN:SELF:AD
DR
FACTORY
DEFAULT
Sets the IP address at the default
MANUAL
SUBNET
MASK
ENTER Sets the static Subnet Mask. :SYST:COMM:LAN:SELF:S
MAS
FACTORY
DEFAULT
Sets the IP address at the default
SYSTEM INFO
HANDLER
I/F
OFF Disables the handler I/F :CONT:HAND:STAT OFF
ON Enables the handler I/F :CONT:HAND:STAT ON
SCANNER
I/F
OFF Disables the scanner I/F :CONT:SCAN:STAT OFF
ON Enables the scanner I/F :CONT:SCAN:STAT ON
[Trigger] Triggers the unit :TRIG:IMM
1. The field name changes depending on the list sweep parameter.
2. The field name changes when entering a comment.
Key Operation Function SCPI Command