Keysight E4980AL - Page 57

Keysight E4980A/AL Precision LCR Meter 57
Display Format
MEAS DISPLAY Page
3-
Procedure for setting the impedance range
Step 1. Press the [Display Format] key.
Step 2. Press the MEAS DISPLAY softkey.
Step 3. Use the cursor keys to select the RANGE field.
Step 4. Use the softkeys to select the impedance range mode or impedance range.
Manually setting the time for the impedance range mode
Changing impedance range requires a few milliseconds to several tens of
milliseconds. For details, refer to Settling Time in data sheet in Chapter 11
“Specifications and Supplemental Information”
Softkey Function
AUTO Sets the impedance range mode to AUTO.
HOLD Sets the impedance range mode to HOLD.
INCR + Increments the impedance range in the HOLD mode.
DECR - Decrements the impedance range in the HOLD mode.