98
Parameter description:
VLAN Mode Configuration
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the
port setting on Port mode configuration web page. Only when both Global Mode
and Port Mode on a given port are enabled, ARP Inspection is enabled on this given
port. Second, you can specify which VLAN will be inspected on VLAN mode
configuration web page. The log type also can be configured on per VLAN setting.
Possible types are:
None: Log nothing.
Deny: Log denied entries.
Permit: Log permitted entries.
ALL: Log all entries.
Buttons
Add New Entry: Click to add a new VLAN to the ARP Inspection VLAN table.
To Next Page
Loading...
