LevelOne IGP-1271 - Page 113

106
 NAS-IPv6-Address (Attribute 95)
The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. If
this field is left blank, the IP address of the outgoing interface is used.
 NAS-Identifier (Attribute 32)
The identifier - up to 255 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not included
in the packet.
Server Configuration
The table has one row for each RADIUS server and a number of columns, which are:
 Delete
To delete a RADIUS server entry, check this box. The entry will be deleted during the
next Save.
 Hostname
The IP address or hostname of the RADIUS server.
 Auth Port
The UDP port to use on the RADIUS server for authentication.
 Acct Port
The UDP port to use on the RADIUS server for accounting.
 Timeout
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
 Retransmit
This optional setting overrides the global retransmit value. Leaving it blank will use
the global retransmit value.
 Key
This optional setting overrides the global key. Leaving it blank will use the global
key.