107
Adding a New Server
Click to add a new RADIUS server. An empty row is added to the table, and the
RADIUS server can be configured as needed. Up to 5 servers are supported.
The button can be used to undo the addition of the new server.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
2-5.3.2 TACACS+
Web Interface
To configure a Common Configuration of AAA, TACACS+ in the web interface:
1. Click Configuration, Security, AAA and TACACS+.
2. Specify the Parameter.
3. Click Apply.
Figure 2-5.3.2: The TACACS+ Authentication Server Configuration
To Next Page
Loading...
