216
exclude the port from the IP subnet-based VLAN, make sure the box is unchecked.
By default, no ports are members, and all boxes are unchecked.
Adding a New IP subnet-based VLAN
Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row is
added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled on the selected stack switch unit when
you click on "Save". The “Delete” button can be used to undo the addition of new IP
subnet-based VLANs. The maximum possible IP subnet-based VLAN entries are
limited to 128.
To Next Page
Loading...
